James B.
First bone handled knife. Wish y’all were in TEXAS!!!
Zachry A.
Too tight to use. I may be able to drill the ol harbor freight spacer and give it some slack. Ordered several belts and have only tried the 36 which won’t fit and the 120 which did fit. 120 worked good.
Randy E.
some of the best belts i have ever used
Joe F.
Prompt delivery, the belts look great. Have not had time to try yet.
Alex G.
This belt shreds so well, perfect for base level low grit shaping of steel. Definitely will buy plenty more of these as it's been the best belt I've used by far
Jason J.
The Shredder belts worked great for stock removal even with a low power 1x30 belt sander. I have no reason to use anything else for shaping raw material.
Charles K.
These belts really take off some metal fast.
Edward G.
Just like the 24 grit, these belts ROCK!
Edward G.
Wow is all I can say. Occasionally I have the need to hawg down some steel with my little 1x30 and these belts made quick work of that! Smooth consistent grinds too!
Steve D.
I have Harbor Freight sanders and big box store belts. It seemed the grit came off faster than the material. Spend a little bit extra and get great performance.
Jeffrey S.
These belts are great! I put a lawnmower blade on the sander to sharpen. Roughing in blade was no problem! Quick and cool!!!
Tony W.
I was referred to Combat through the Forum and they are very good belts. I will be making other orders.
Mitchell H.
Best and coolest running belts for anyone, from hobby to full production shops. Can't beat it.
Paul M.
These are great for getting that initial bevel cut in. I have ordered these in the past and they work great on my 1x30 grinder. The last time I ordered though, the belts were a tad loose. Overall, great abrasives!
Ethan B.
Removes material far faster than cheaper belts.
Joshua N.
Did a great job removing material on spring steel. Used on the HFT 1x30 belt grinder and even though the motor is grossly underpowered, these belts still did a lot of work relatively quickly and hardly show any signs of wear yet.
John H.
High quality products
John H.
Very high quality abrasives
Steven F.
This belt EATS! 24 grit plus ceramic means be gentle. First time I used this on my cheap little sander, I treated the pressure like my 60 grit Lowes belt. The metal didn’t heat up like the cheaper belt, but it took half the time to shed twice the mass. Watch your grind lines vs pressure. Good luck!
Stephen F.
These belts are fast!!! They cut faster than they generate friction too
Steven H.
Great product! When it comes to stock removal, this belt gets the job done!
Justin D.
The only belts I will use now. I used several brands and nothing lasts. I use 120 to sharpen my lathe chisels. These last and remove material fast and cool. Stop wasting money and get some. Thank you Combat Abrasives!
James E.
Great product, and service to match. Will definitely be using them again.
Shaun L.
The 24 grit ceramic just eats through some 1095 without issue.
Jeff K.
Really like these belts. I am pretty new to knife making. The ceramic belts are long lasting and remove a lot of steel.
Michael G.
These belts are amazing I had purchased a few belts from somewhere else and they did not last long at all combat is the real deal and thank you guys for inspiring I will be a life long customer
Christopher B.
Great belt for stock removal, couldn't ask for anything better!
Stephen M.
Great product, leaves smooth finish and doesn't wear like the store bought stuff
Roger B.
Work yeast and remove stock fast.
Hendrie J.
Great product: well worth the money.
Stephen S.
Shredders are awesome, sanding disk are monsters, everything from combat I've used is best. Lifetime customer.
Charles Derek A.
Definitely got me as a customer combat abrasives! Awesome product and arrived in no time. 36g shredder
Berl W.
These belts are unbelievably awesome! They tear through hard steel like butter (ok, maybe not like butter but you get the idea). I never realized the possibilities until I heard about combat abrasives and put their products to work.
Roger B.
Best belts I've tried so far.
Joel C.
Great belt for stock removal. Ten times better than any other brand I've tried.
jesse L.
A little bit of a tight fit than I was expecting but it removes material like a champ
Brad W.
Wear your safety glasses. The first belt I threw on my machine flicked little particles at me for the first few minutes of usage. Really took off mild steel stock material in a hurry. I used another of the same belt, and found it was very useful for shaping wood pieces.
MICHAEL B.
Best belt on the market in my opinion!
MICHAEL B.
Best belt on the market in my opinion!
MICHAEL B.
Best belt on the market in my opinion!
Paul Z.
I love these belts. They outlast and out perform other belts I have used. Great product and amazing customer service.
Paul Z.
I love these belts. They outlast any of the belts I have tried and am absolutely impressed.
Jorge J.
Runs perfect on the 1 x 30
Removes material quickly
Great quality belts!
Richard B.
these belts work very well
Robert D.
I use my 1 x 30 grinder with a ceramic belt to remove most of the file from the file. I do final grinds on a 2 x 48, but the 1 x 30 with a 40 grit ceramic really hogs off a lot of material.
Robert D.
Great product!! Never a complaint with the product. This company is so popular you may wait a little longer for your order to get filled but it's worth it.
Bob C.
First time using Combat belts. Much smoother and better cutting. Seem to last longer. I know where I'm buying more.....
Ron D.
Quality all the way. Quick removal of 1080 steel from 3/16 new project of mine. A definite repurchase when needed.
jason i.
I am a newbie maker... I have ordered a few other belts from other places trying to obtain something that would make my work more efficient. My personal opinion is that more efficient grinding leads to more consistent and accurate grinds, not that mine are anything to write home about. I went from spending about a week to grind a 4" blade to being able to knock out 2 or 3 in a night with these belts. The 24 gr. is awesome and the fact that I can get good quality belts for a 1x30 is equally awesome until I can afford/justify a 2x72.
Robert N.
Since upgrading to combat abrasives I’ve noticed a significant decrease in grind time!!
The lower grit belts make short work of initial bevel even after heat treat. I’ve noticed my neck no longer hurts from excess time grinding. Now, if I can only keep my 4 year old from climbing onto my head every time I sit down to relax!!
Thanks Y’all
Jason K.
These belts real wake up a 1x30. Once you figure out the pressure not to bog the sander down they really remove material fast.
Micaiah E.
Great belts especially if you are doing a file knife project. You are the only company I buy my belts from.
Rick T.
I’m a novice beginner in the blade & blacksmithing arena. Working with a very limited budget, I started out with a HF 1 X 30 along with a variety of their belts. Thanks to your Black Friday discount, I jumped in to give your belts a try. I’m BLOWN AWAY by the difference! Thanks for dramatically impacting my ability to “finish strong.”
Jennifer B.
We haven't used them yet, but have before, they're great
Frank P.
Haven’t opened the new ones yet. The old ones don’t give up.
Michael R.
I use to get my belts from a man that makes the sharpener, but his belts were inferior, they were not cut straight and one beĺt would sharpen 2 knives. I love combat
Except for slow shipping.
Marty s.
I have used other brands but they don't compare
Savior Y.
Simply put, it devours steel!
Richard C.
Very effective for shaping wood. Wear out pretty quickly on metal - probably more due to the nature of a 1x30 than anything else. These are the most cost effective 1x30s I've found. Will buy again.
Richard C.
Very effective for shaping wood. Wear out pretty quickly on metal - probably more due to the nature of a 1x30 than anything else. These are the most cost effective 1x30s I've found. Will buy again.
Richard C.
Very effective for shaping wood. Wear out pretty quickly on metal - probably more due to the nature of a 1x30 than anything else. These are the most cost effective 1x30s I've found. Will buy again.
Leon S.
These belts last much longer than locally sourced ones
Kevin P.
This ceramic belt takes the melt off quick, even using the cheap 1x30 Harbor Freight sander.
Ryan M.
Best belts!..there tough and chew thru metal like nothing, i use 1x30 and there still powerful belts
Tristan C.
The service was awesome and the belts are even better. The shredders I ordered really tear through some metal too. Saves a lot of time. Also were delivered fast. All in all these are the best performing longest lasting belts you can buy.
Samuel S.
Belt is a metal eating machine
James R.
The belts work great for metal griding of small square stock for welding small patio tables.
Michael R.
Belts last longer than the ones I got from a different company.
Johnny R.
Best belts I have used.
Johnny R.
Best belts I have used.
Johnny R.
Best belts I have used.
judah d.
Hogs through steel like a beast
John K.
Great belts. They remove metal faster than any belt I have used. Makes my grinding time half of what it used to be. Thanks for your superior product. I will be ordering more.
Chris W.
i continue to buy these repeatedly because they work great.
stanley h.
Great belts!! Very happy!
Collin B.
100% will order more soon! Will be needing a few for my 6x48 also
Chris W.
I love these belts. The speed with which I can rough profile and thin down material is awesome.
Paul H.
The cheapest upgrade to our grinder ever!
My son and I are making knives using the stock removal method. We are just starting so we bought a cheap used 1x30 belt grinder. Everyone said we really needed a 2x72 but I can't put that money into it right now. We started with the Harbor Freight 1x30 bands. They were okay but not great. But, WOW, this ceramic stock removal band is great. It makes working with cheap equipment bearable.
THANKS!
Andrew A.
Shredders really hog off material in no time.
Jordan K.
I love the belts, and that they are reasonably priced.
stanley h.
Excellent quality and service. Thank you
Marty s.
Awesome product!!
Robert S.
Great product, aggressive stock removal!
Ramiro Gomez T.
Removes stick quicker than quick.
I wont purchase belts anywhere else . Hands down. Greats belts. @wolface2
Ryan S.
Eats metal like a fat kid!!
Pablo R.
They shred the fuck outta steel
Robert D.
As always the product is great. The service?? Not so much. It took almost 2 weeks from the time I placed my order until it was shipped. That seems like a really long time for me.
Jacob F.
The belts work wonderful but the turnaround time to get the belts to my shop was terrible it took about 5 days for them to ship. But overall they are goodq
Christo B.
These belts are great, an made my work easier
They last much longer than expected
Thanks for a awesome job combat!!
David T.
Love you guys. Thanks for being there.
Todd f.
Fantastic belts. Removes material effortlessly. Highly recommend!
James W.
Belt wasawsome cut my beveling and removal time in half,will b ordering again soon ,thanks guys for a great product
Suzyn H.
I wasn’t sure what to expect with these belts. They came highly recommended from a well know knife maker. The first thing I noticed that the price was very reasonable. I purchased my first belt grinder and left the belt on that came with the machine. I figured I didn’t want to burn through a good belt on some other non-knife making I needed to do first. That belt did the job, but was trashed quickly. I changed belts, and got to see the difference of a high quality belt. Words can not adequately describe the side by side difference. As best as I can describe the combat abrasive belts lasted twice as long and did the work three times faster. I wouldn’t have believed it if I didn’t see it. Worth every penny and then some.
Leon S.
awesome stock removal tool