Edmund B.
I just got to use these today, they are a whole different world than anything else I've used. Photo is just roughed out with 120 grit on a forged blade. I highly recommend these belts!
Travis G.
Best belts I've used so far. The rougher belts chew metal amd the smoother belts leave a nice finish and have lasted quite a bit. Good starter selection for someone that has never used this brand before.
Andrew A.
These belts work great. Last longer than the first belts I purchased.
stanley h.
The belts are high quality. The joint is flush and runs smoothly!
JEREMY F.
Excellent belts. These cut my grinding time down by at least 50% compared to the box store belts.
Jeremy J.
Was using really cheaply made belts prior to buying these. They would only last one knife if that. These combat abrasive belts last way longer. I get more done faster using less belts. Price point was great for the quality of belts. Will definitely order more in the future.
Shawn E.
I have been looking for good quality belts for my 1x30 harbor freights belt sanders. So far I am very impressed with the quality and variety of belts included in this starter pack. Makes stock removal a breeze even on a simple beginner sander like this.
Mark J.
Great product at a great price.
Justin B.
Cuts the time of beveling and initial grinding in half. The higher grit belts are just as good at finish work. Kits are very well priced. Will take your productivity to the next level! I'm very pleased with my purchase and will do buisiness with these guys in the future.
Tyler B.
First experience with combat upgraded to the 2 by 72 but still use the 1x30 every day where precision is required love both and will continue to use combat daily
Jeremy W.
Great selection of belts to allow you to try out some that you might not have used yet. Good pricing considering the amount and variety. Order fulfillment took almost a week, so bear that in mind when ordering. If you need belts right away, you might have to look elsewhere.
Susan B.
I love the heavier grits, the lighter grits are bonded with a bridge on the backside of the belt and it makes a thump thump thump when you use them.. not real fond of that.. i will continue to use your heavier grit belts as they are exactly as specified, great bite and quick stock removal.
Sam W.
The starter pack is awesome everything i need from coarse for stock removal to ultra fine for polishing awesome product glad i found you guys
Randall B.
This is a really great pack of belts for the money. We’re pretty happy with the grit diversity offered in it.
My son and I got knives ‘shave hair off your arm’ razor sharp right away with higher grits.
While the ceramic belts seem to chew material away quickly, and have held up well so far while shaping.
Thanks CA!
Timothy H.
Turnd my cheap 1X30 grinder into a very useful tool
Rich K.
Great belts. They make a world of difference!
Dylan S.
These belts work great. They make my little 1x30 much more effective than it originally seemed.
James J.
Just getting into the knife making hobby so I picked up a 1x30 belt grinder but the HF belts were not doing very well so I thought I'd give Combat Abrasives a try. These are top notch belts, even for a little 1x30. Metal comes off smooth and quick with coarser grits and the 1000 grit polishes things up nicely. Love the belts, will be purchasing again.
Mark S.
Haven't had a chance to use yet. Sander was back ordered.
Jason M.
So far I've only needed to use the one belt. And it's being used on a cheap Chinese belt sander from Amazon. It smoothly cut down some bar steel for a new pad on a motorcycle kick stand, and has been amazing for rough shaping my kydex projects as well as my wood pieces for jigs. So far, I can say nothing but good things from these belts on this cheap belt sander I have
Gregory G.
Delivery was fast. Once they came in got straight to grinding to test it out. This stuff shreds though steel. Makes it all too easy. And the price is worth it a million times over. I’ve found my forever company.
Don G.
I like that i have the variety at hand and not having to leave my project; as my time is valuable. Also, your product is durable/long-lasting, and exactly what I need at-hand. I would continue to come back to this company for all my “sanding” needs.
David L.
Love the J Flex belts actually I live all the belts in the kit. I'll definitely be ordering them again
jaime l.
The ceramic belts are much more efficient than other low grit materials. Shipping out was slow for me and had to follow up to try and get them shipped. Once they did ship they got here quick....but your paying premium shipping rates for that. It’s a good product and I have now ordered some 72 inch stuff for my larger grinder... but once again I ordered them on the 14th and today is the 18th... no shipping notice yet.
STEVE V.
They work great! I picked up a small grizzly grinder for a nephew who is interested in getting into knife making and these ceramic belts made it a pretty fun experience. They sure remove a bunch of metal for a 1 x 30 machine.
Alan P.
Works super well without clogging so quickly or ripping
Alan W.
I ordered the 1”x30” belt starter kit. It came on time and it’s everything I expected!
Scott R.
Great product and great customer service! I would definitely recommend any of these products. Thank you
Joseph H.
Just started getting into bladesmithing and bought the good ole harbor freight 1x30 belt grinder. The belts were terrible and burned up fast. So i bought the 1x30 kit from combat and man. The 36 grit moves metal much faster and lasts wayyyy longer. Keep in mind its only harbor freight. And just knowing that the belts made that much difference in performance is why i will buy every belt from combat
Cory S.
I ordered the 1/30 starter kit that came with 60-800 grit grinding belts. These belts are long lasting, and very durable. I have been very please and would recommend anyone to try them out. The best experience I’ve had with the company is they were on time and actually emailed me back within minutes when I had a question. Great company guys!!!
Desmond H.
These belts hog some material and seem to be lasting longer then the hazard freight belts. Really like the j-flex 220 belts for putting curves on the blade. Ordered two starter kits will order again.
Calvin F.
These belts have improved the performance of my sander 100 percent
miguel c.
Thank you , I'm a beginner happy you are helping .
Christopher T.
Belt cuts and grinds better than I could have imagined.
Stephen c.
Love these belts!
Ryan P.
Bought the starter 1x30 kit and was impressed with what was included. Great variety of belts and all super high quality and seem to be holding up well to a lot of work.
franklin c.
My son uses these and gets his blades sharp
Jesse K.
The Combat Abrasives 1x30 belt starter kit has improved both my speed and results! Thank you for a solid product.
Peter R.
BIG improvement over your run of the mill Amazon belts.
I like the red 60/120 grit belts, however they wear down a little faster than I'd like. After about 1 solid 10" blade, profile/shape grinding and bevel grinding they're reduced to about 1/2 efficiency.
But for about $74 shipped to by door it's such an array of quality belts, hard deal to beat. Now I can dial in the ones I use most and replace from there. Will be purchasing through them again.
Phil B.
Seem to be good quality belts so far. Easy to work with customer service. Perhaps a suggestion to reword the confirmation email that says, "We received your order, but haven't gotten around to shipping it quite yet." It sounds pretty casual. It would be more suitable to be told something like, "We received your order and it is in preparation for shipping." I particularly was waiting for the belts as the ones I ordered from another source were inferior. Other that that, I'll order again.
Patrick T.
Belts last much longer than the hardware store belts. Large range of grits and compounds make these a great purchase.
Sebastian G.
Shredder belts are badass! Metal flys off like it was never there. For on some of the other belts isn’t great for my grinder but they work very nicely to spite that.
Jacob D.
Loving these belts, cut great. Do recommend.
Spencer D.
This is a great selection of belts to be able to grind bevels, profile and get your blade razor sharp all in one package! Love em!!
Paul H.
As advertised! Great belts for quick stick removal and smooth finishes. Highly reccomend
Andrew K.
Good quality belts for a 1x30. They make stock removal a whole lot easier on a cheap little grinder. I did have a couple belts that didn’t fit though, they seemed to be just a bit smaller and wouldn’t go on the grinder. All in all good product, good price, and fast shipping.
Mark B.
I learn about your products from a YouTube video. I am very new to the world of knife marking. I’m a former Chef of 25 years, always wanted to
Make my own knives, my grandfather was a machinist, so I grew up
In his shop as a kids, tried making my first knives by hand. They were very rough and time consuming. I got a small 1x30 inch belt grinder and you started kit and could not be happier, each knife is looking batter and batter, thank you so much
David W.
Outstanding selection of belts the 80 grits ceramic goes thru the hardest steel like butter. I reprofiled some of my friends knives that they had neglected some hard some sizable dents and nicks they came out beautiful. I usually put convex edges on the blades that I repair and sharpened.I will definitely order from this company again. Great customer service and shipping.
Tom H.
This is a great starter kit and contains all of the belts you need to get started in knife making. Money well spent.
Keith C.
Good assortment. Well priced. Great value and good belts. Ceramics are very hungry!
thomas t.
I am a novice beginner knife maker during this time of forced unemployment. I had purchased a few 1x30 belts at Harbor Freight, but they were not so good.
You were recommended by a knife guy on Youtube so I gave it a try.
Package arrived two days early.
I have been using the belts and they work great. The combo kit has a very good variety of grits and I am very happy with the quality.
marcus d.
Excellent belts.
Doug K.
What a great starter kit. I may be starting small with the 1x30 but I already feel like I elevated my work. Thank you for the great belts and thank you to knife talk podcast.
Chris B.
The combat abrasives 1x30 belts I ordered are a night and day difference from other brands I have tried usually on a 1x30 machine anything over a 80 grit has a bad belt bump but the combat belts have no belt bump even on the 800 grit
Terry C.
I have ordered the 30" belt package once before and really liked the fact the package has a wide variety of belts that meet my needs. I also like the quality of the belts and prompt delivery. Thanks again for your great customer service.
Steven A.
These belts have helped the process go much faster
Alberto S A.
Love the 1x30 kit! I was able to
make my knives look so much better with these belts!
Josh W.
These belts are great and shipping was incredibly fast. 10/10 will order again.
Nicholas v.
I was really surprised how quickly the order was processed and shipped. Thank you for making my time in isolation easier
Matthew W.
Absolutely love the 60 grit shredder belt and belt cleaner. Smooth and reliable grinds every time and the belt cleaner is making my belts last longer. Will use Combat Abrasives for life. Quality products that work at a great price.
Bill L.
For a novice knife maker, this kit is perfect!!!
Caleb R.
These are great belts!
David P.
Combat abrasives are fantastic. Used the 1x30 starter kit to make my very first knife. Would recommend highly to anyone wanting to get into knife making.
Thanks again Combat Abrasives
Craig P.
The amount of belts supplied in this kit is fantastic! They make it really easy to modify off-the-shelf hardware to work for my custom applications.
Heidi L.
I love this kit!! Definitely worth it!!
Michael W.
Great products great service.
David B.
A few belts seems to run a little rough on my grinder but overall great deal great belts
Logan d.
1x30 starter kit worked amazingly definitely will never use another belt
Logan d.
Got the 1x30 starter kit, after 10 minutes of use i was already back on the website ready to order more. Amazing belts
Brandon M.
This is my first knife and due to the combat abrasive's starter kit it was no problem. Thank you for making a great product at affordable prices.
Seamus P.
Combat abrasives have changed my capabilities of finishes that I'm able to produce and that's because they offer not only superior grits on their products as well as the grease and belt erasers to help you get every bit of life out of their products but they make a wide variety of products for the makers that have hobby sized equipment just like me.
Dmytro K.
Amazing belts. Made my learning experience with my little 1 x 30 grinder so much better. Shredder is a monster belt. Highly recommended. Fast delivery and a great quality product!
Joshua G.
Excellent belts! The kit makes for a great introduction to this brand; the ceramic belts really work well and last for a lot of grinding.
Gordie M.
SO FAR SO GOOD, JUST SETTING UP A LITTLE SHOP RIGHT NOW
BEST
GORDIE
Darren R.
It an amazing product, I wish I knew about it earlier on save a lot of time hand sanding . I’m definitely gonna purchase more of these belts, I highly recommend them
Gideon L.
I originally found Combat though a blade smith on Instagram and I decided to try them out. And I'm so glad I did!!!!! Even though I only have a 1x30 it still cuts like a beast!!!!
Matthew C.
Great belts. They grind and polish quick!
Christopher R.
Such a great selection of belts will keep me going for a while.
Spencer D.
You simply can't beat this starter kit! The shredder belts are excellent for stock removal, they cut through steel like a hot knife through butter! As far as the other belts, they work great for finishing! High quality products all around! I will definitely be buying from combat abrasives in the future!
Richard C.
1x30 belts are tough to find for us beginners, these belts from combat abrasives are much better than others I've used and the price is great on this starter kit. If I ever get the skill to move past hobby stage of knife making, I'll definitely give the 2x72's a try. In the meantime, I'll be ordering more of these! This kit has made me 4 knives so far, still enough belt left for a couple more so the cost/amount produced seems pretty good to me!
Miguel H.
These belts have a stiff backing and they cut amazing. The grease stick help keep the belts cooler and prevents them from clogging especially when grinding aluminum. Definitely a great buy.
Tom D.
Great product!!
Will be ordering more.
Paul D.
Great belts and will order again
Joe R.
These belts are awesome. They turn even the slowest sander into a metal eating machine.
frank g.
Top quality belts.
Patrick T.
I love these belts. The shredder belts saved me two days worth of rough grinding compared to Silicon Carbide. An absolute must for any knife maker or metal worker.
DARREN S.
Great belts! Shedder belts really remove some metal!
tv.visuals
1 x 30 starter pack from Combat Abrasives. a little of the grits I can get in stores, a lot of the grits I cant, great price thanks!
Thomas H.
These are quality 1 x 30 belts for all your knife making needs. I'm very happy with the quality and amount of material removal per belt, and the shredders are out of this world. I'll definitely be ordering again.
