ROGUE Slow-Setting Epoxy is a slow-setting alternative to our ROGUE Fast-Setting Epoxy. It's a two-part adhesive with a 1:1 ratio between hardener and resin. It has a working time of 30 minutes and a cure time of one hour. When mixed, the two parts form high-strength bonds through a chemical reaction between the resin and the hardener that can occur in a large temperature spectrum. When ambient temperatures pass 80-90 (27-32°C), the epoxy will harden more rapidly causing the working time and cure time to decrease substantially.
Preparation: Mix onto a clean, dry, and oil-free surface. Roughen smooth surfaces for better adhesion.
Mix 1:1 ratio of resin and hardener. Mix resin and hardener for one minute thoroughly.
For best results, apply a small amount to both surfaces and press together. Pro Tip: Use a clamp.
See it in action from our friend Walter Sorrells. Skip to around the 4 minute mark for it's use.
Great set time....speeds up my day..new found product loyalty..
It was the first time using the rouge epoxy. I always use a slow setting epoxy & this did not disappoint. I’m getting ready to do a batch of stainless knives so it will be tested. I also used there awesome scalloped belts & I don’t know how I was finishing handles without them. Combats epoxy & any of there belts will be a must have for my shop.
I used the Epoxy to glue on the scales. The longer open time made the process a lot less stressful.
Love the workability of the slow setting epoxy for my full tang knives. Gives me plenty of time to make sure everything is lined up properly , easy to work with and a super strong bond as always with rogue adhesives. 5 star all the way
Very strong hold, with a nice 30min work time!
some the best epoxy on the market love it and love working with it.
I chose Rogue epoxy for my first knife build and I'm extremely happy with the results. Mixed evenly and applied easily with minimal squeeze out. Seems to be super strong stuff!
Great adhesive to work with. Mixed easily and fast. Cured excellent, great bond.