What is Rogue Fast-Setting Epoxy?

ROGUE Fast-Setting Epoxy is an alternative to our ROGUE Slow-Setting Epoxy. It's a two-part adhesive with a 1:1 ratio between hardener and resin. It has a working time of five minutes and a cure time of fifteen minutes. When mixed, the two parts form high-strength bonds through a chemical reaction between the resin and the hardener that can occur in a large temperature spectrum. When ambient temperatures pass 80-90 (27-32°C), the epoxy will harden more rapidly causing the working time and cure time to decrease substantially.

It is ideal for bonding together blades and handle materials.

Instructions:

Preparation: Mix onto a clean, dry, and oil-free surface. Roughen smooth surfaces for better adhesion.

Mix 1:1 ratio of resin and hardener. Mix resin and hardener for one minute thoroughly.

For best results, apply a small amount to both surfaces and press together.
Pro Tip: Use a clamp.

See it in action from our friend Walter Sorrells. Skip to around the 4 minute mark for it's use.

Products

+Collections

+Tags

Follow