|  714-203-2541   |   Free Shipping over $99 (Contiguous U.S.}

Polishing Compound for Buffing Wheels


Compound Color
Black Cut Bar
Blue Rouge
Brown Tripoli
Green Rouge
No Scratch Pink
White Rouge
Competition Purple

Collections: Finishing Supplies

Category: Finishing Supplies, Polishing Compound

Type: Unknown Type


Our metal polishing compounds are used with airway buffing wheels to increase the effectiveness of the wheel while being used during the cutting, buffing, and polishing process. Some are of a coarser consistency and are usually used to remove scratches while the others are finer, which lends to them being used to shine and finish your work. They should be applied to airway buffing wheels by coating the edges of the airway buffs like below.


No scratch pink bar is generally used for polishing handle materials such as woods and plastics although some knifemakers do actually use it on the steel as well! But we recommend it for the handle! This bar weighs about 2.5 LBs and is 10" in length. 

Black Stainless Bar is used as a "first cut" on your steel and is used to take out those initial 320 & 400 grit scratch marks left by your sandpaper whether it be from hand sanding or belt sanding. You want to start with this cut bar then go into a second step polish. Be sure to not cross contaminate your bars on the same wheel without raking out the previous this case the black stainless bar. This bar weighs about 3 LBs and is 10" in length. 

Green Rouge Bar is used for a high luster finish and "coloring" stage we like to call it when polishing your steel. Due to the green chromium oxide, this bar will leave a darker, richer luster in your steel. If you are looking for the brightest mirror shine, you will want to go on to the next bar (purple). This bar weighs about 3.1 LBs and is 10" in length. 

Purple Rouge Bar is used for a final mirror show shine finish. You can use this bar after the black bar or the green bar if you want to do it 3 polishing stages. This is our finest finishing bar and will really blow you away! This bar weighs about 3 LBs and is 10" in length. 

White Bar & Blue bar - This bars quite frankly leave such a similar finish not even we can tell which finish is from which bar if we were doing the "pepsi challenge". We will say though that we find people generally use the white or the blue for a high luster finish based on what other people have told them, and they just stuck with it over time. If you ask us....the purple bar is way better! This bar weighs about 2.5 LBs and is 10" in length. 

What is the best affordable bench top polisher for buffing?

JET BENCH TOP POLISHER - Best polisher that works with 8" airway buffing wheels.  


 The color of the polishing compound is almost always a byproduct of the natural abrasive ingredients. Tripoli powder, pictured below for example, is an abrasive product that along with the other formula ingredients allows the buffing wheel to polish a metal surface. These abrasives are often pigments as well causing the bar color to take on the appearance of the abrasive.

In situations where abrasives may be similar in appearance, but have very different abrasive qualities, many manufactures (ourselves included) can add separate pigment or dye to help differentiate the products from one another.

Do you need to wear a respirator when metal polishing? 

Yes it is strongly recommended and even suggested it should be required to wear a respirator when polishing. We strongly recommend this respirator as it offers great protection and is affordable. You can buy it HERE its only $ 100 and it will PROTECT you! 

BEST Full Face Respirator for metal polishing $ 100

SDS Sheet for Metal Polishing Compounds for Buffing Wheels

SDS Sheet for the Black Cut Bar 

SDS Sheet for the Blue Rouge Bar

SDS Sheet for the Brown Tripoli Bar

SDS Sheet for the Green Rouge  Bar

SDS Sheet for the No Scratch Pink

SDS  Sheet for the White Rouge Bar

SDS Sheet for the Competition Purple Bar

Related Items