2" x 36" Sanding Belts for Finishing & Sharpening, 3 PACK
- A/O finishing belts for 2″ x 36″ machines — 120 to 600 grit
- X-weight, J-Flex backings — from flat platen to slack-belt contours
- 3 belts per pack, rated 4.8★ by 25 verified customers
Free shipping on orders over $99 (contiguous U.S.)
X-weight for flat platens. J-weight flexes a little more. J-Flex is the contour belt. Step grits one at a time — from $6.48 per pack.
From grind lines to a finished surface
Aluminum oxide belts in graded backings for 2″ x 36″ machines. Step down through the grits one at a time for an even scratch pattern, or use the fine grits with light passes to sharpen and hone.
Weights & grits
Pick your backing and grit
Showcase specifications about a product to help your customers making an informed decision about their purchase.
Sturdy cloth backing for flat-platen work and general finishing.
The most flexible backing — slack-belt work, curves and handles.
Suitability
What are these belts best for?
Use them for
- Refining scratch patterns after ceramic work
- Sharpening and honing with the fine grits
- Contours and handles on the J-Flex backing
Not the right belt for
- Heavy stock removal — use the ceramic Shredder belts
- Rust and scale blending — surface conditioning
Technical details
The deeper dive
Aluminum oxide grain on X-weight, J-Flex backings depending on your selection — stiffer weights for flat work, flexible weights for contours.
Standard 2″ x 36″ belts — confirm your machine takes 2″ x 36″ before ordering.
Eye protection and a properly rated respirator. We recommend a full-face respirator like this one on Amazon.
Complete the setup
Works together with
2x36 Stock Removal
Ceramic Shredder belts to hog material first.
2x36 Surface Conditioning
Non-woven grades for satin finishes.
Belt Cleaner
Clears loading and extends belt life.
Questions
2x36 finishing FAQs
Will these fit my machine?
Standard 2″ x 36″ belts — confirm your machine takes 2″ x 36″ before ordering.
Which backing weight do I need?
X-weight for flat platen work, J-weight for light flexibility, J-Flex for slack-belt and contours.
How do I sequence grits?
Never skip more than one grit step — sand until the previous scratch pattern is fully gone, then move down.
What comes in a pack?
3 belts of the option you select.
What do I use before these?
Hog material with ceramic Shredder stock removal belts first, then start finishing.