2" x 72" Surface Conditioning Belt Kit
- All four non-woven grades — Coarse, Medium, Very Fine, Ultrafine — one belt each
- Clean, blend, deburr and finish in one long-lasting kit
- Rated 4.8★ by 80 verified customers
Free shipping on orders over $99 (contiguous U.S.)
One 2″ x 72″ belt in each grade: Coarse (brown), Medium (maroon), Very Fine (blue), Ultrafine (grey).
The full satin-finish sequence in one box
Surface conditioning belts clean, blend, deburr and finish all in one — and they last. The fibrous non-woven web resists loading and heat build-up, so finishes stay consistent for far longer than a coated belt.
This kit is the complete grade ladder: run Coarse → Medium → Very Fine → Ultrafine and you go from cleanup to a uniform 220-grit-class satin finish in four steps.
Grade guide
What each belt does
Grit equivalents are practical guidelines — non-woven material isn’t officially grit-rated.
≈ 60 grit scratch. Real bite — use a lighter hand.
≈ 80–120 grit scratch. All-round cleanup and blending.
≈ 150–180 grit scratch. Pre-finish blending.
≈ 220 grit finish. The final satin step.
Suitability
What is this kit best for?
Use it for
- Uniform satin finishes on blades and parts
- Deburring and weld cleanup
- Stainless, aluminum, titanium, fiberglass, plastics
Not the right kit for
- Stock removal or shaping — ceramic Shredders first
- Precise grit-spec work — equivalents are approximate
Technical details
The deeper dive
This kit is the same four belts sold on our Surface Conditioning page — bundled so you have the full sequence on hand.
Light-to-moderate pressure, keep the work moving, and follow the grade sequence coarse to ultrafine.
Standard 2″ x 72″ belts. Confirm your grinder’s spec before ordering.
Eye protection and a properly rated respirator. We recommend a full-face respirator like this one on Amazon.
Complete the progression
Works together with
Surface Conditioning belts (2x72)
Non-woven grades for blended, uniform finishes.
Ceramic Shredder 3-Pack (2x72)
The stock-removal workhorse: ceramic 24–120 grit.
Finishing & Sharpening belts (2x72)
Aluminum-oxide 36–800 grit for the finishing sequence.
Questions
Surface conditioning kit FAQs
What’s included?
One 2″ x 72″ belt in each grade: Coarse, Medium, Very Fine and Ultrafine.
What grit are these equivalent to?
Guidelines: Coarse ≈ 60, Medium ≈ 80–120, Very Fine ≈ 150–180, Ultrafine ≈ 220 grit scratch patterns.
How long do they last?
Notably longer than coated belts — the non-woven web resists loading and heat build-up.
Will they fit my grinder?
Standard 2″ x 72″ size.
What if I only need one grade?
Each grade is sold individually on our Surface Conditioning belts page.
Four belts, every finish between raw and satin
The complete conditioning sequence, ready on the shelf. Rated 4.8★ by 80 customers. Free shipping (order is over $99).