4" x 24" Sanding Belts for FInishing & Sharpening, 6 PACK
- A/O finishing belts for 4″ x 24″ machines — 36 to 800 grit
- X-weight backings — from flat platen to slack-belt contours
- 6 belts per pack
Free shipping on orders over $99 (contiguous U.S.)
X-weight for flat platens. J-weight flexes a little more. J-Flex is the contour belt. Step grits one at a time — from $19.84 per pack.
From grind lines to a finished surface
Aluminum oxide belts in graded backings for 4″ x 24″ machines. Step down through the grits one at a time for an even scratch pattern, or use the fine grits with light passes to sharpen and hone.
Weights & grits
Pick your backing and grit
Showcase specifications about a product to help your customers making an informed decision about their purchase.
Sturdy cloth backing for flat-platen work and general finishing.
Suitability
What are these belts best for?
Use them for
- Refining scratch patterns after ceramic work
- Sharpening and honing with the fine grits
Not the right belt for
- Heavy stock removal — use the ceramic Shredder belts
- Rust and scale blending — surface conditioning
Technical details
The deeper dive
Aluminum oxide grain on X-weight backings depending on your selection — stiffer weights for flat work, flexible weights for contours.
Standard 4″ x 24″ belts — confirm your machine takes 4″ x 24″ before ordering.
Eye protection and a properly rated respirator. We recommend a full-face respirator like this one on Amazon.
Complete the setup
Works together with
4x24 Stock Removal
Ceramic Shredder belts to hog material first.
4x24 Surface Conditioning
Non-woven grades for satin finishes.
Belt Cleaner
Clears loading and extends belt life.
Questions
4x24 finishing FAQs
Will these fit my machine?
Standard 4″ x 24″ belts — confirm your machine takes 4″ x 24″ before ordering.
Which backing weight do I need?
X-weight for flat platen work, J-weight for light flexibility, J-Flex for slack-belt and contours.
How do I sequence grits?
Never skip more than one grit step — sand until the previous scratch pattern is fully gone, then move down.
What comes in a pack?
6 belts of the option you select.
What do I use before these?
Hog material with ceramic Shredder stock removal belts first, then start finishing.