Flap Wheel 12" x 2" Unmounted Aluminum Oxide, Pack of 5
- 12″ x 2″ unmounted aluminum oxide flap wheels
- Arbor-hole mount for bench motors and polishing lathes
- 5 wheels per pack from $922.00
Free shipping on orders over $99 (contiguous U.S.)
40–60 for cleanup and deburring, 80–120 for blending, finer grits for finishing. From $%MIN% per pack.
Wide, forgiving finishing on the bench
Aluminum oxide flaps arranged around the hub conform to the work as the wheel spins — they blend, deburr and finish contours, tubes and irregular shapes without gouging. Mount the arbor hole on a bench motor, lathe or shaft adapter and finish larger parts with a wide, even contact patch.
Grit-by-grit
Which grit does what
Showcase specifications about a product to help your customers making an informed decision about their purchase.
Profiling with a finer scratch pattern
The all-round stock removal grit
Refining grind lines before finishing
Light removal ahead of finishing
The bridge into the finishing line
Profiling with a finer scratch pattern
The all-round stock removal grit
Refining grind lines before finishing
Light removal ahead of finishing
The bridge into the finishing line
Profiling with a finer scratch pattern
The all-round stock removal grit
Refining grind lines before finishing
Light removal ahead of finishing
The bridge into the finishing line
(currently sold out)
Suitability
What are these belts best for?
Use them for
- Blending and deburring contours and edges
- Finishing larger parts on a bench setup
- Pre-finish surface prep on metal
Not the right belt for
- Heavy stock removal — use ceramic abrasives
- Flat platen work — belts and discs are faster
Technical details
The deeper dive
Aluminum oxide cloth flaps bonded around a center arbor hole, 12″ x 2″ size.
Check the arbor hole size in the options — mounts on bench motors, lathes and mandrels. Wheel size 12″ x 2″.
Eye protection and a properly rated respirator. We recommend a full-face respirator like this one on Amazon.
Complete the setup
Works together with
Mounted Flap Wheels
1″–3″ shank wheels for die grinders.
Shaft Adapter
1/2″ to 5/8″ adapter for bench grinders.
Clean & Finish Discs
Non-woven conditioning on an arbor.
Questions
12″ x 2″ flap wheel FAQs
How do these mount?
Through the center arbor hole onto a bench motor, lathe spindle or mandrel — see the hole size in the picker.
Which grit should I start with?
40–60 for cleanup, 80–120 for blending, finer grits to finish.
Why a flap wheel?
The flaps conform to curved and irregular surfaces, giving an even finish where rigid wheels gouge.
What comes in a pack?
5 wheels of the grit you select.
Wood or metal?
Aluminum oxide handles both — deburring metal or smoothing wood profiles.