Flap Wheel 8" x 2" Unmounted Aluminum Oxide, Pack of 5
- 8″ x 2″ unmounted aluminum oxide flap wheels
- Arbor-hole mount for bench motors and polishing lathes
- 5 wheels per pack from $319.75
Free shipping on orders over $99 (contiguous U.S.)
40–60 for cleanup and deburring, 80–120 for blending, finer grits for finishing. From $%MIN% per pack.
Wide, forgiving finishing on the bench
Aluminum oxide flaps arranged around the hub conform to the work as the wheel spins — they blend, deburr and finish contours, tubes and irregular shapes without gouging. Mount the arbor hole on a bench motor, lathe or shaft adapter and finish larger parts with a wide, even contact patch.
Grit-by-grit
Which grit does what
Showcase specifications about a product to help your customers making an informed decision about their purchase.
Profiling with a finer scratch pattern
The all-round stock removal grit
Refining grind lines before finishing
Light removal ahead of finishing
The bridge into the finishing line
Profiling with a finer scratch pattern
The all-round stock removal grit
Refining grind lines before finishing
Light removal ahead of finishing
The bridge into the finishing line
Profiling with a finer scratch pattern
The all-round stock removal grit
Refining grind lines before finishing
Light removal ahead of finishing
The bridge into the finishing line
Suitability
What are these belts best for?
Use them for
- Blending and deburring contours and edges
- Finishing larger parts on a bench setup
- Pre-finish surface prep on metal
Not the right belt for
- Heavy stock removal — use ceramic abrasives
- Flat platen work — belts and discs are faster
Technical details
The deeper dive
Aluminum oxide cloth flaps bonded around a center arbor hole, 8″ x 2″ size.
Check the arbor hole size in the options — mounts on bench motors, lathes and mandrels. Wheel size 8″ x 2″.
Eye protection and a properly rated respirator. We recommend a full-face respirator like this one on Amazon.
Complete the setup
Works together with
Mounted Flap Wheels
1″–3″ shank wheels for die grinders.
Shaft Adapter
1/2″ to 5/8″ adapter for bench grinders.
Clean & Finish Discs
Non-woven conditioning on an arbor.
Questions
8″ x 2″ flap wheel FAQs
How do these mount?
Through the center arbor hole onto a bench motor, lathe spindle or mandrel — see the hole size in the picker.
Which grit should I start with?
40–60 for cleanup, 80–120 for blending, finer grits to finish.
Why a flap wheel?
The flaps conform to curved and irregular surfaces, giving an even finish where rigid wheels gouge.
What comes in a pack?
5 wheels of the grit you select.
Wood or metal?
Aluminum oxide handles both — deburring metal or smoothing wood profiles.