1" x 72" Sanding Belts for Stock Removal, 12 PACK
- 1″ x 72″ belts in working dozens — Ceramic Shredder or Zirconia+, 36–120 grit
- 12 belts per pack: ceramic from $4.04/belt, zirconia from $3.26/belt
- Rated 5.0★ by verified customers
Free shipping on orders over $99 (contiguous U.S.)
Steel and stainless: Ceramic Shredder. Budget coarse work: Zirconia+. Both in 36–120 grit.
Detail belts for full-size grinders
A 1″ x 72″ belt turns a 2x72-class grinder into a detail machine — tight curves, plunge lines, narrow profiles — without giving up belt speed or length. These come twelve to a pack in two stock-removal materials: our #Shredder ceramic for steel and stainless, and Zirconia+ for budget-friendly coarse work.
Options
Material and grit guide
Prices per 12-pack.
Self-sharpening ceramic for steel, stainless and hard alloys. $4.04–6.72 per belt.
Long-life coarse grinding at a lower price point. $3.26–5.05 per belt.
Suitability
What are these belts best for?
Use them for
- Detail grinding and tight curves on 2x72-class machines with 1″ tracking
- Plunge lines and narrow profiles
- Volume shops that burn through detail belts
Not the right belt for
- Machines that cannot track a 1″ x 72″ belt — check your spec
- Fine finishing — pair with the A/O 1x72 12-packs
Technical details
The deeper dive
Ceramic cuts faster and cooler on hardened steel and lasts longer; Zirconia+ is the value pick for coarse work on softer materials.
For grinders that accept 1″ x 72″ belts — many 2x72 machines track 1″ belts; confirm yours does.
Eye protection and a properly rated respirator. We recommend a full-face respirator like this one on Amazon.
Complete the setup
Works together with
1x72 Finishing 12-Pack
The A/O ladder in the same format.
2x72 Ceramic Shredders
Full-width stock removal for the same machine.
1″ A/O Shop Rolls
Cut-to-length hand sanding in the same width.
Questions
1x72 stock removal FAQs
Will these fit my grinder?
They are 1″ x 72″ belts — many 2x72-class grinders track 1″ belts, but confirm your machine supports the width.
Ceramic or Zirconia+?
Steel/stainless and hard alloys: ceramic. Budget coarse work on softer materials: Zirconia+.
Why 12-packs?
Detail belts wear faster than wide belts — a dozen keeps the rack stocked at a better per-belt price.
What comes after 120 grit?
The 1x72 A/O finishing 12-packs (120–600 grit).
Can I run the ceramic wet?
The Shredder ceramic line is wet-capable; run zirconia dry.
Detail work, stocked by the dozen
Ceramic or Zirconia+, 36–120 grit, 12 to a pack. Rated 5.0★ by customers.