6" x 89" Sanding Belts for Finishing and Sharpening, 2 PACK
- A/O finishing belts for 6″ x 89″ machines — 36 to 800 grit
- X-weight backings — from flat platen to slack-belt contours
- 2 belts per pack
Free shipping on orders over $99 (contiguous U.S.)
X-weight for flat platens. J-weight flexes a little more. J-Flex is the contour belt. Step grits one at a time — from $21.96 per pack.
From grind lines to a finished surface
Aluminum oxide belts in graded backings for 6″ x 89″ machines. Step down through the grits one at a time for an even scratch pattern, or use the fine grits with light passes to sharpen and hone.
Weights & grits
Pick your backing and grit
Showcase specifications about a product to help your customers making an informed decision about their purchase.
Sturdy cloth backing for flat-platen work and general finishing.
Suitability
What are these belts best for?
Use them for
- Refining scratch patterns after ceramic work
- Sharpening and honing with the fine grits
Not the right belt for
- Heavy stock removal — use the ceramic Shredder belts
- Rust and scale blending — surface conditioning
Technical details
The deeper dive
Aluminum oxide grain on X-weight backings depending on your selection — stiffer weights for flat work, flexible weights for contours.
Standard 6″ x 89″ belts — confirm your machine takes 6″ x 89″ before ordering.
Eye protection and a properly rated respirator. We recommend a full-face respirator like this one on Amazon.
Complete the setup
Works together with
6x89 Stock Removal
Ceramic Shredder belts to hog material first.
Belt Cleaner
Clears loading and extends belt life.
Greasestick Tube
Lubricant stick for cooler grinding.
Questions
6x89 finishing FAQs
Will these fit my machine?
Standard 6″ x 89″ belts — confirm your machine takes 6″ x 89″ before ordering.
Which backing weight do I need?
X-weight for flat platen work, J-weight for light flexibility, J-Flex for slack-belt and contours.
How do I sequence grits?
Never skip more than one grit step — sand until the previous scratch pattern is fully gone, then move down.
What comes in a pack?
2 belts of the option you select.
What do I use before these?
Hog material with ceramic Shredder stock removal belts first, then start finishing.