William B.
Only belts I use now on inside curves on knife handles. Doesn't leave any gouges caused by belt edges
William B.
Great belts. Leaves no gouges from the ends of the belts
Keith H.
Make handle work a dream
William B.
Love these belts. When sanding knife handles the curves are so much easier sand. Leaves no ridges from the belt edges. Wouldn't be without them. Thanks !!!
Kyle W.
These are my favorite for shaping handles, saves me a ton of time!
Mike W.
2 belts for one handle for me. They worked as advertised. Very smooth finish on wood and bone. Great for finger grooves.
Jason C.
These scalloped belts are such a huge time saver I wish I had started using them sooner! I have used them on everything from G10 to stabilized wood and there is so much less hand shaping and finish work required. If these were available at higher grits I don't know if I would have to do any hand sanding at all. Definitely give them a shot!
Zane B.
These belts along with putting a leather pad on my flat platen have been a game changer for me. The combination of the two have cut my hand sanding down by almost half. The reason I use the leather pad is that this gives a little softer finish to the piece without chatter marks. I love this product!
William Y.
Scalloped belts are great for handle plunge lines!
Bryan V.
great product, great service
William S.
Very happy with the belts
Will R.
Makes contouring a breeze.
Ryan B.
Works awesome for shaping your handles
Jack J.
Never used one of theses belts. They are all they say. Will buy more.
Great belts and fast shipping.
Jack J.
Never used one of theses belts. They are all they say. Will buy more.
Great belts and fast shipping.
Jack J.
Never used one of theses belts. They are all they say. Will buy more.
Great belts and fast shipping.
Garth S.
These scalloped belts are pretty nice for those tight spots, although they do have a short learning curve to them.
John C.
These scalloped belts are amazing for contoured handles. Love 'em!
James W.
Used these belts for the first time last month like them so much i ordered more.
Jack A.
It makes the steel look just like I want it to at that time of the build
Travis S.
These belts are amazing not sure how I did with out them for so long
Dan N.
Helps in shaping small pieces
Paul C.
i don't quiet know how to use this one yet, but ill get around to it. hahah
Kyle W.
Love these belts, must have for handle finishing
T L.
Good belts! I ordered a variety of belts and they're all quite nice. Shipping takes a little while, but be patient, order ahead or time, it's worth it.
Jonathon N.
Really neat belt and works really really well. Will definitely buy more.
Scott S.
These scalloped belts work wonders! I got more done in fifteen minutes with these than I did in six hours of hand sanding. These will always be on hand!
Jeremiah L.
These belts work great will order again
Robert W.
Dose exactly what is needed
rodger J.
Gets in those hard to get places without taking a bite where it shouldn't. Lol
rodger J.
Gets them hard to get places without taking a bite where it shouldn't. Lol
rodger J.
Really gets in them hard to get places with out taking a bite where it shouldn't. Lol
Brendan L.
Huge time saver. Took me about three minutes to go from sixty to three hundred grit.
Brendan L.
These things are a real time saver. Took me about three minutes to go from sixty grit shaping scratches to three hundred.
Brendan L.
Right after a medium fine surface conditioning belt, I use these to achieve a satin finish. They work great every time.
Rich G.
The scalloped edged belts make sanding down curves easy and with no worries of digging into the handles.
Colton M.
Great, durable belts! I use these to sharpen on my 2x72!
Michael S.
Gives me a scary edge
Michael S.
Best scalloped belts I have found
Michael S.
Great for finishing up the edges before sharpening!!!
Thomas M.
Great belts for getting into tight areas. After shredders these are my favorite belts from combat!
Larry W.
Really nice belts leaves a really smooth round is Great for profile in my handles
Larry W.
It really help me save so much time really great product
Andrew A.
WE LOVE COMBAT ABRASIVES!
Blake B.
These are great...took a bit of trial and error to get the hang of them, but they really help with handle contouring and don't bite into the material like straight edged belts will.
Brendan L.
These things are the real deal. Long lasting and easy to work with. 10/10
Michael S.
My first use of the scalloped belt. Wow - like magic on rounded and contoured handles !
Russell H.
Love this belt and combat abrasives
Brendan L.
The scalloped edge belts shave an incredible amount of time off of the process, without decreasing the quality of the blade. A must have for every shop. And they’re like three bucks.
Graeson F.
I should probably start getting used to being blown away by the products offered by Combat Abrasives, I see the hype and get on board, but every time their products just blow my expectations out of the water. These scalloped belts save an insane amount of time sculpting handles, if you are thinking about purchasing some of these belts I would definitely recommend it as I wish I had used these belts much sooner, they last a long time and save tons of time and joint pain in hand sanding handles.
Dale U.
I ordered 2" x 72" belts and received 1" x 72" belts
Rick H.
I'm a new knife maker but I have a lot of metal working experience. These belts are on par with ones costing twice as much, so glad I found you!
Michael P.
These scalloped belts make it really easy to shape a contoured handle, and sand it to a higher grit. I have to do less hand sanding, and these are really time savers.
Gabe j.
Great belts. Fantastic for sharpening
Blake B.
The benefit of the scalloped edge combined with the range of grits available make these a true winner!
Blake B.
These have changed the game for handle contouring!
Blake B.
These belts are great! Really let you get into those tight curved without tearing up the handle material...
Chris H.
These last longer than I expected on my Grizz 2×72 singe speed motor. Some belts lose their bite on a grinder running full tilt. I havent fully used up the abrasive on a belt yet. Ill cut the old ones in 5 or 6 in strips for finishing work.
Walter W.
I already use the shredders and they flat out handle the business! I wanted to try these structured abrasive belts to compare them to the Trizacts. These structured abrasive belts leave a fantastic finish on the my blades making it much easier and most importantly quicker to get hand sanding done. Soon I plan to be running Combats belts 100%. Get some!
Scott S.
First time using these belts. It was a very pleasant surprise. I hate hand sanding more than anything. With the aid of these belts there is zero hand sanding on this knife.
Josh B.
Couldn’t be happier with combat abrasives scalloped sanding belts! Their extreme flexibility really allow me to get into those tight curves resulting in a smooth finish unparalleled to that of normal straight edged belts!
Jim C.
Great Belts! I start the 36 grit shredder belt and finished with the structured A16, with a few belts in between!
Jim Canady (JACK - JimAnneCanadyKnives)
foolhardy_knife_works
These carbide cork belts from combat abrasives are just killer.
